Articles
Articles techniques, comparaisons de normes, études de cas et guides d'achat sur la tuyauterie sous pression, les brides et les pièces forgées.
Trouvé via Google ? Recevez un devis ASTM/ASME en 4 heures.
Demander un devis30 articles· Normes
NormesUnderstand ASTM A403/A403M for wrought austenitic stainless steel fittings: WP/CR grades, classes, heat treatment, and procurement checks for EPC buyers.
NormesASTM A694/A694M covers forged or rolled steel flanges, fittings, valves, and parts for high-strength transmission-service pipe. This guide explains grades, procurement checks, and inspection points for EPC buyers.
NormesASTM A182 covers forged low-alloy and stainless steel flanges, fittings, valves, and parts for high-temperature service. This guide explains what buyers must specify beyond the standard, including grade, heat treatment, and dimensional standards.
NormesASME B16.42 covers cast ductile iron flanges and flanged fittings in Classes 150 and 300. This guide explains scope, key requirements, and procurement checks for EPC engineers and buyers.
NormesASME B16.39 covers threaded malleable iron unions in Classes 150, 250, and 300, including design, ratings, materials, threads, and tests. This guide explains what EPC engineers and procurement managers must verify when specifying these unions.
NormesASME B16.3 covers malleable iron threaded fittings in Classes 150 and 300, including ratings, dimensions, threading, and coatings. This guide explains the standard's scope, key requirements, and procurement checks for EPC engineers and buyers.
NormesASME B16.14 covers ferrous pipe plugs, bushings, and locknuts with pipe threads, including ratings, dimensions, materials, and marking. This guide explains the standard's scope, key differences from ASME B1.20.1, and what buyers must verify to avoid specification errors.
NormesASME B16.1 covers gray iron flanges and flanged fittings in Classes 25, 125, and 250. This guide explains what the standard includes, how it differs from ductile iron (B16.42), and what buyers must verify when sourcing gray iron flanges.
NormesASME B16.49 covers factory-made induction bends for transportation and distribution piping (B31.4, B31.8, B31.11). It is not for process or power piping. This guide explains scope, key requirements, and procurement checks.
