المدونة
مقالات تقنية ومقارنات معايير ودراسات حالة وأدلة شراء حول وصلات الأنابيب والفلنجات والمطروقات.
وصلتم إلينا عبر Google؟ احصلوا على عرض سعر ASTM/ASME خلال 4 ساعات.
اطلب عرض30 مقالات· المعايير
المعاييرUnderstand ASTM A403/A403M for wrought austenitic stainless steel fittings: WP/CR grades, classes, heat treatment, and procurement checks for EPC buyers.
المعاييرASTM A694/A694M covers forged or rolled steel flanges, fittings, valves, and parts for high-strength transmission-service pipe. This guide explains grades, procurement checks, and inspection points for EPC buyers.
المعاييرASTM A182 covers forged low-alloy and stainless steel flanges, fittings, valves, and parts for high-temperature service. This guide explains what buyers must specify beyond the standard, including grade, heat treatment, and dimensional standards.
المعاييرASME B16.42 covers cast ductile iron flanges and flanged fittings in Classes 150 and 300. This guide explains scope, key requirements, and procurement checks for EPC engineers and buyers.
المعاييرASME B16.39 covers threaded malleable iron unions in Classes 150, 250, and 300, including design, ratings, materials, threads, and tests. This guide explains what EPC engineers and procurement managers must verify when specifying these unions.
المعاييرASME B16.3 covers malleable iron threaded fittings in Classes 150 and 300, including ratings, dimensions, threading, and coatings. This guide explains the standard's scope, key requirements, and procurement checks for EPC engineers and buyers.
المعاييرASME B16.14 covers ferrous pipe plugs, bushings, and locknuts with pipe threads, including ratings, dimensions, materials, and marking. This guide explains the standard's scope, key differences from ASME B1.20.1, and what buyers must verify to avoid specification errors.
المعاييرASME B16.1 covers gray iron flanges and flanged fittings in Classes 25, 125, and 250. This guide explains what the standard includes, how it differs from ductile iron (B16.42), and what buyers must verify when sourcing gray iron flanges.
المعاييرASME B16.49 covers factory-made induction bends for transportation and distribution piping (B31.4, B31.8, B31.11). It is not for process or power piping. This guide explains scope, key requirements, and procurement checks.
